Ten capabilities, one closed loop from prescription to SOP.
Polymer optics fail late when design, molding, and coating live in separate buildings. We run them out of one — and we let the capability that knows the most about the failure mode you are worried about lead the engagement.
Design
Where the manufacturability of the part is part of the prescription. Imaging and illumination optics designed against the press, the resin, and the AR stack — not against an idealised glass surrogate.
Optical & Mechanical Design
Imaging and illumination optics designed for manufacturability — DFM lives in the prescription, not the review meeting.
designDiffractive Optics
Kinoform DOEs and multi-order diffractive lenses for lightweighting and achromatization.
designMicrolens Arrays
Replicated MLA tooling for homogenization, wavefront sensing, and illumination.
Manufacture
All-electric injection molding, single-point diamond turning, and lot-traceable polymer raw materials — a closed loop from prototype optic through PPAP and SOP.
Polymer Injection Molding
Six all-electric presses, ISO Class 8 cleanroom, closed-loop hold and pack on every cavity.
manufactureSingle Point Diamond Turning
Moore Nanotech 350FG and 250UPL — prototypes, freeform surfaces, and mold-insert finishing in one bay.
manufacturePolymer Raw Materials
PMMA, PC, COP/COC, OKP, Topas, polysulfone — selected and characterized for the optical envelope.
Finish & Verify
Evaporative coatings on polymer substrates, contract coating, lens-stack assembly, and metrology that produces release evidence — not just a CMM number.
Evaporative Coatings
AR, mirror, beamsplitter, and bandpass coatings via thermal and e-beam evaporation.
finishCoat as a Service
We coat parts molded elsewhere — bring lots through our coating chamber on a contract basis.
finishAssembly
Lens-stack assembly, active alignment, bonding, and seal cure under cleanroom protocols.
finishMetrology & Testing
Interferometry, profilometry, spectrophotometry, MTF, and environmental — every part has a number behind it.
Tell us the optical failure mode that worries you most.
We will tell you which of the ten capabilities engages first, who in the building owns it, and what evidence we put on the release record.